Specifications

Operational
Light Source	Visible Laser Diode 675 nm ± 5 nm
Depth Of Field	12.7 mm - 203.2 mm (0.5" - 8")
Scan Speed	52 scan lines per second
Scan Pattern	Single scan line
Min. Bar Width	6.8 mil or .0068"
Decode Capability	Autodiscriminates all standard bar codes; For other symbologies call Metrologic
System Interfaces	Wireless Liberty(tm) Scanner Interface (transmitter)* *Liberty(tm) Scanner Interface receiver required for operation with MS6130. (receiver interfaces: RS232, Light Pen, Keyboard Wedge). Depending on frequency of operation, one receiver may be dedicated to multiple scanners
Print Contrast	35% minimum reflectance difference
Roll, Pitch, Yaw	42º, 68º, 52º
Beeper Operation	3 tones for programming; preferred normal operation: no tone from MS6130, receiver tone on good reception
Indicators (LED)	red = laser on, ready to scan green = good read, decoding
Battery	3.6 V (600 mA hrs) rechargeable NiCAD replaceable pack
Standby Current	30 mA - after full charge
Battery Operating Life	8 hours (200 scans per hour of operation)
Physical
Dimensions	205 mm L X 63 mm W X 24 mm H (8" X 2.5" X 0.94")
Weight	10.5 oz.
Environmental
Operating Temperature	0ºC to 40ºC (32ºF to 104ºF)
Storage Temperature	-20ºC to 50ºC short term(recommended) -20ºC to 35ºC long term (recommended) batteries should be stored separately
Humidity	5% to 95% relative humidity, non-condensing
Light Levels	Up to 1500 footcandles
Shock	1.5 m (5') drop
Contaminants	Sealed to resist airborne particulate contaminants
Ventilation	None
Approvals	CDRH Class ll/Class I
RF Link Characteristics
Frequency	434 MHZ
Certification	No licensing required to operate
RF Protocol	One way transmission; transmission time of 30 ms depending on protocol; 50 k baud rate dedicated transmitter(s) to receive link
Range	Up to 30 feet (conditions permitting)
Charger Operation
Charging	2 hours full charge (no scanning)
Indicators	Red = charger ready Green = charging mode

	Go Back